P7100
Today the P7100 fuel pump is the ultimate for racing and tractor pulling. The legendary P7100 fuel injection pump offered by Industrial Injection comes in three
different power levels. All three pumps are fully rebuilt and calibrated to ensure
complete satisfaction.
12 Valve P7100 Pumps 1994 - 1998 |
Dragon Fly Built with stock 12mm pumps capable of 470cc fuel delivery. Higher RPM
setting available up to 5000 RPM.. Higher timing adjustments are made upon request. Modifications
are made to the aneroid for valet driving conditions. Modified torque curves. Core charge:
$1000.00. (Note: If core being returned is from a 1994 or 1995 Dodge only $400 of the core charge will be returned. Cost: $2050.00 |
Dragon Flow Built with 13mm pumps. The Dragon Flow P7100 pump delivers fuel up to
670cc at 4000 RPM and 800cc at 1000 RPM. Higher RPM settings are available up to 5000 RPM.
Higher Timing adjustments are made upon request. Modifications are made to the aneroid for valet driving conditions.
Torque curve values are modified. Core charge: $1000.00 (Note: If core being returned is from a 1994
or 1995 Dodge only $400 of the core charge will be returned) (OFF
HIGHWAY USE ONLY) Cost: $3300.00 |
Super Dragon Flow Built with 14mm pumps capable of 1400cc. Higher RPM
settings are available up to 5000 RPM. Higher timing adjustments are made upon request. Modifications are
made to the aneroid for valet driving conditions. Torque curve values are modified. Core charge:
$1000.00 (Note: If core being returned is from a 1994 or 1995 Dodge only $400 of the core charge will be returned) (OFF HIGHWAY USE ONLY) Cost: $4300.00 |
VP44
Industrial Injection remanufactures and calibrates the Bosch
VP44 fuel injection pump for the 1998.5 to 2002 Dodge Cummins 5.9L diesel. The
most recent upgrade parts are used in the rebuild process and the pump is calibrated to current specs.
24 Valve VP44 Pump 1998.5 - 2002 |
Stock and Hot Rod VP44
Industrial Injection offers the Hot Rod VP44
fuel injection pump that can add an additional 100 HP to your 24 valve Cummins Diesel.
IIS builds the Hot Rod VP44 with the best
possible upgraded parts and electronics to ensure satisfaction. The Hot Rod VP44 is as close to a new injection pump as you
can purchase on the market today. Industrial
Injection’s Hot Rod VP44 performance fuel injection pump will put your truck ahead
of the pack.
Cost: $1900.00 Core: $400.00
|
CP3
The Modified CP3 offered by Industrial Injection is a drop in replacement
for the stock CP3 fuel pump. The Modified CP3 fuel injection pump flows 30% more fuel than a stock pump and adds 60
HP to 100 HP depending on how the truck is setup. The Modified CP3 injection
pump was created to keep up with the demands of aggressive fueling chips and large injectors.
Don’t let the loss of fuel pressure dampen your day at the dyno.
24 Valve CR CP3 Pump 2003 - 2007 |
Modified CP3
The Modified CP3 offered by Industrial Injection is a drop in replacement
for the stock CP3 fuel pump. Industrial Injection offers the Modified CP3 injection pump for the 2003 to 2007 Cummins.
The Modified CP3 fuel injection pump flows 30% more fuel than a stock pump and adds 60 HP to 100 HP depending on how the truck
is setup. The Modified CP3 injection pump was created to keep up with the demands
of aggressive fueling chips and large injectors. Don’t let the loss of fuel pressure dampen your day at the dyno.
Cost: $1400.00 Core:$700.00
|
Stage III CP3 The New Stage III CP3 offered by Industrial Injection is almost a drop
in replacement for the stock CP3 fuel pump. Industrial Injection offers the stage III CP3 injection pump for
the 2003 to 2007 Cummins. It Flows 45% more fuel than a stock pump and adds up to 200 HP depending on how
the truck is setup. Cost:
$1800.00 Core: None |
Super CP3 Flowing a modest
230% more fuel than a stock CP3 makes the Super CP3 the Grand Pooh-Bah of pumps. Install kit comes with a new front cover,
oil line, fuel line and all required hardware to install pump. This pump requires relocation of the ECM and install is labor
intensive. Cost: $3600.00 Core: None
|
Dual CP3
The New Industrial Injection Dual CP3 is the ultimate for performance. This kit can be purchased with a new Modified
or a Stage III CP3. It is capable of over 1200 HP.
(FOR OFF ROAD USE ONLY)
Cost: $2800.00 Core: None
|
